Great Plains 3N4010HDA Operator Manual - Manual (Page 10)

6 3N-4010HDA Table of Contents Index Great Plains Manufacturing, Inc.
196-444M Table of Contents Index 2013-09-24
Safety Reflectors and Decals
Your drill comes equipped with all lights, safety reflectors
and decals in place. They were designed to help you
safely operate your drill.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
3. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Red Reflectors
838-266C
rear face, outside ends, rear casters;
2 total
Amber Reflectors
838-265C
rear face, inside ends, wing tower tool bars,
rear face, outside ends, wing tower tool bars,
outside face of wing end plates;
6 total
27010
27010