Speed sensors – Great Plains TSF1290 Operator Manual User Manual
Page 82
78
TSF1080, TSF1090, TSF1280 & TSF1290
Great Plains Manufacturing, Inc.
500-641M
05/10/2012
Speed Sensors
The standard TSF1080, TSF1090, TSF1280 & TSF1290
does not include a speed sensor, which is required by
the Auto-Control system to regulate material rate based
on current speed. Optional sensors kits detect speed via
wheel rotation or radar ground speed.
If the tractor already has a speed sensor, a “Y” cable is
available to share its signal with the Raven SCS 450 con-
troller. Otherwise, order one of the following:
Your Great Plains dealer can assist you with installation
Radar Speed Sensor
This easy-to-install precision sensor may be mounted on
either the tractor or the sprayer. It is compatible with a
wide variety of agricultural cab controls, and may be
used for implements other than the TSF1080, TSF1090,
TSF1280 & TSF1290 when not spraying.
Raven Wheel Speed Sensor
This economical speed sensor is sprayer-mounted. Con-
sult your dealer for installation.
Y-Cable
If your tractor already has a speed sensor, it may be
compatible with the Raven SCS 450 controller. Consult
your dealer for advice.
If the sensor is compatible, these cables share the signal
between your existing tractor systems and the Raven
SCS 450.
Description
Option
Part
Numbers
TSF RADAR KIT
43
509-289A
TSF WHEEL SENSOR MNT KIT
42
509-288A
Figure 74
Radar Speed Sensor
27153
Figure 75
Wheel Speed Sensor
27154
Part Numbers
Comment
115-0159-432
TRW radar, Case IH
115-0159-519
DICKEY-john or Magnavox radar, John Deere 1990 or later
115-0159-518
DICKEY-john radar, Cat Challenger (Model 65 & 75)
115-0159-517
DICKEY-john radar, Case IH
115-0159-529
DICKEY-john radar, Ford/White
115-0159-627
DICKEY-john radar, Cat Challenger (Model 65C, 75C-Mod, D-Mod Row Crop 35,45,55)
115-0159-700
DICKEY-john or Magnavox radar, John Deere 7000/8000/9000 Series (2WD or MFWD)
117-0159-462
Magnavox radar, other than John Deere
117-0159-463
TRW radar, other than Case IH
Figure 76
Y Cable
27155