Great Plains TSF1290 Operator Manual - Manual (Page 10)

6 TSF1080, TSF1090, TSF1280 & TSF1290 Great Plains Manufacturing, Inc.
500-641M 05/10/2012
Practice Safe Maintenance
▲ Understand procedure before doing work. Use proper tools
and equipment. Refer to this manual for additional informa-
tion.
▲ Work in a clean, dry area.
▲ Fold the Front Fold Boom Sprayer, put tractor in park, turn
off engine, and remove key before performing maintenance.
▲ Make sure all moving parts have stopped and all system
pressure is relieved.
▲ Allow Front Fold Boom Sprayer to cool completely.
▲ Disconnect battery ground cable (-) before servicing or
adjusting electrical systems or before welding on Front Fold
Boom Sprayer.
▲ Inspect all parts. Make sure parts are in good condition and
installed properly.
▲ Remove buildup of grease, oil or debris.
▲ Remove all tools and unused parts from Front Fold Boom
Sprayer before operation.
Prepare for Emergencies
▲ Be prepared if a fire starts.
▲ Keep a first aid kit and fire extinguisher handy.
▲ Keep emergency numbers for doctor, ambulance, hospital
and fire department near phone.
Tire Safety
▲ Tire changing can be dangerous and should be performed
by trained personnel using correct tools and equipment.
▲ When inflating tires, use a clip-on chuck and extension hose
long enough for you to stand to one side–not in front of or
over tire assembly. Use a safety cage if available.
▲ When removing and installing wheels, use wheel-handling
equipment adequate for weight involved.