Safety reflectors and decals – Great Plains TSF1290 Operator Manual User Manual
Page 12

8
TSF1080, TSF1090, TSF1280 & TSF1290
Great Plains Manufacturing, Inc.
500-641M
05/10/2012
Safety Reflectors and Decals
Your sprayer comes equipped with all safety reflectors
and decals in place. They were designed to help you
safely operate your sprayer.
▲ Read and follow decal directions.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1.
Clean the area on which the decal is to be placed.
2.
Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Slow Moving Vehicle Reflector
818-055C
center section of boom, facing to rear;
1 total
Red Reflectors
818-266C
center section of boom, outside ends,
rear face of lower tube;
2 total
20441
20441