System components, Integrated with digilin, System components -2 – ClearOne PAN6400 User Manual
Page 12
NetStreams Panorama System Installation Guide
2-2
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
When integrated with Musica, you can mirror multiple PAN6400 VDCs and have them
function as a single VDC to increase the number of connections. When mirroring two
PAN6400 VDCs, you increase the connections per source from three to six.
As with standalone configurations, you can cascade a configuration with PAN6400
VDC and Musica to add additional zones.
You can include a Musica MUR2EM Network Interface in the integrated installation.
This allows the system to be controlled from a web browser.
Integrated with DigiLinX or Third-Party Control Systems
The Panorama video distribution system also integrates with the NetStreams DigiLinX
IP-Based Multi-Room Audio and Control system or other control systems through
RS-232 connections.
The PAN6400 VDC distributes balanced, line-level video and controls displays.
DigiLinX controls the PAN6400 VDC switching functions through a ControLinX™
driver and distributes the video sources’ audio over the DigiLinX network using a
MediaLinX™ for each source. Each MediaLinX also serves as the controller for each
video source.
PAN6400 VDC can also distribute S/PDIF digital audio to audio-video (A/V)
receivers in tandem with MediaLinX distributing the audio over network when using
S-Video or composite video connections. Alternatively, you can mirror multiple
PAN6400 VDCs and have them function as a single VDC to increase the number of
connections. This allows you to distribute component video from one PAN6400 VDC
and coaxial digital (S/PDIF) audio from the other PAN6400 VDC.
You can cascade a configuration with PAN6400 VDC and DigiLinX integrated to add
additional zones. This requires a ControLinX for each Panorama.
The Panorama can send and receive RS-232 commands allowing third-party
controllers to use the Panorama as a video switcher. The same general wiring
procedure applies when integrating with third-party control systems as with DigiLinX.
The RS-232 port wiring in particular is the same.
A full RS-232 protocol guide is available to authorized dealers from the dealer section
of the NetStreams
www.netstreams.com
).
System Components
There are many ways to use Panorama, but the components of the system are finite.
The main components include:
PAN6400 VDC
PANVP500 or PANVP700 Video Ports
third-party video source (cable, satellite dish, or other input device)
third-party display (TV, Plasma/DLP/LCD or projectors).