SARGENT Keypad Exit Devices User Manual

Page 7

, an A

SSA ABL

Y Group company

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

800-810-WIRE (9473) • www.sargentlock.com • A7137B

Rim Installation Instructions for KP8800 Series (Continued)

Step #2 Install Outside & Inside Trim

2. Inside Trim

• Route “ET” harness along track cutout for wood doors and

access hole for metal doors

• Mount exit chassis carefully. DO NOT PINCH HARNESS WIRES

• “ET” spindle will engage into the hub of exit device chassis

• Secure chassis with (2) 1/4-20 x 2-3/8" flat head

machine screws

1. Outside Trim

• Route harness through under cut of cylinder

hole and out to other side of door

• Mount “ET” control onto door

4. Securing Cylinder

• Secure cylinder to exit chassis using

(2) #12-24 x 1-7/8" connecting screws

• Fasten exit chassis to door using (4) #10 wood

screws or #10-24 machine screws

3. Cylinder Installation (KP8877 & 12-KP8877)

• Insert cylinder into “ET” control

• Mate cylinder tailpiece into hub of exit device

chassis

• Make sure “ET” harness is clear of cylinder and

cylinder tailpiece

(#34)

Cylinder

C For (2) #12-24 x 1-7/8"
connecting screws

ET control

Wire

harness

Center line for

(2) 1/4 - 20 x 2-3/8''

flat head

machine screws

Wire harness

(2) 1/4 - 20 x 2 3/8''
Flat head
machine screws

Exit chassis

Wire harness

(4) #10 Wood screws

or #10-24 machine screws

Exit chassis

Inside

of door

(2) #12-24 x 1- 7 ⁄ 8 ''

connecting screws

Outside

of door

Inside of

door

Outside

of door

Inside

of door