Programming instructions – SARGENT Keypad Exit Devices User Manual
Page 20
Copyright © 2006, 2008, Sargent Manufacturing Company
, an A
SSA ABL
O
Y Group company
. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
800-810-WIRE (9473) • www.sargentlock.com • A7137B
To Interrogate Transaction Log: Last 15 Entries
99# Supervisory or Master Code
*
Yellow LED begins to blink slowly
70# 0# 0#
Yellow LED blinks slowly
*
Yellow LED begins to blink quickly (Point printer at LED as shown)
*
Yellow LED blinks (Printing starts)
When finished printing, press
*
sample transaction output
Yellow LED stops blinking
Sequence number 1 is output request,
Sequence numbers 2-5 are actual entries
Door Number
• 4 digits
• Up to 9999 different doors,
Assigned by End User
Transaction Number
• Single digit, 0-9
• Latest transaction 1
• Oldest transaction 5
User Number
• Three numbers, 001 through 099
• User number assigned during programming
Transaction Type
• 002 Passage “on”
• 003 Program mode
• 005 Access granted
• 010 Emergency code
To Reset / Clear Transaction Log:
99# Master Code
*
Yellow LED begins to blink slowly
76# 00000# 00000#
Yellow LED blinks slowly
*
Yellow LED begins to blink quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
To Delete a User Number:
99# Master Code
*
Yellow LED begins to blink slowly
User Number#
Yellow LED blinks slowly
*
Yellow LED begins to blink quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
To Disable / Enable a User Number:
99# Supervisory or Master Code
*
Yellow LED begins to blink slowly
56# 0# = Enable, 1# = Disable User Number# (04-99) Yellow LED blinks slowly
*
Yellow LED begins to blink quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
To Set Unlock Time:
99# Master Code
*
Yellow LED begins to blink slowly
85# Time Duration# (01-99 Sec) 0#
Yellow LED blinks slowly
*
Yellow LED begins to blink quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
NOTE: The Unlock Time is adjustable for momentary operation. A 5 second unlock time is recommended to extend battery life. Once the unlock time is
entered, it is the same for ALL users except 02, 98 and 99 which are factory set for 10 seconds.
18
Door #5666
Seq User Trans
1
001
003
2
003
005
3
025
005
4
020
005
5
003
005
Door
Number
Transaction
Number
User
Number
Transaction
Type
Hold printer up to the infrared
LED as shown.
To LED
location
Infrared
Printer
(52-2069)
Programming Instructions
5