Tweco 200 XT Auto-Cut 380V - Manual (Page 35)

AUTO-CUT 200 XT
Manual 0-5253 INSTALLATION 3-11
3.09 Connect CNC Cable
1. Connect one end of the CNC cable to the power supply receptacle marked ‘CNC’.
2. Connect the other end of the cable to the CNC device .
3. The CNC cable shield must be attached to ground.
J15 - CNC
CB4 - 5A 120 VAC
F1 - 8A SB 230 VAC F2 - 8A SB 230 VAC
CB3 - 5A 24 VAC
CB2 - 5A 120 VAC
USER INPUT
HEIGHT CONTROL
AIR / O 2 PLASMA N 2 / H35 PLASMA
Art # A-11527_AB
To CNC