tekmar 364 Universal Reset Control Installation - Manual (Page 34)

© 2001 D 364 - 07/01 34 of 36
Error Displayed Description of Error
364 Error Messages (3 of 3)
The control is no longer able to read the DHW sensor due to a short circuit. In this case, the control
ceases DHW operation. Locate and repair the problem as described in the Data Brochure D 070. To
clear the error message from the control after the sensor has been repaired, press either the Menu
or Item button.
The control is no longer able to read the DHW sensor due to an open circuit. In this case, the control
ceases DHW operation. Locate and repair the problem as described in the Data Brochure D 070. If
the DHW sensor was deliberately not installed, set the DHW SENS item to NONE. To clear the error
message from the control after the sensor has been repaired, press either the Menu or Item button.