Syba SB-ATA8212-133R - Manual (Page 44)

RAIDExpress 133 RAID USER MANUAL
83
l Existing Arrays: Existing arrays list.
l Available Disks: Disks can be used to create an array.
l Selected Disks: Disks will be put in an array.
l Click “Create” to create a disk array.
l Remarks:
n Stripe Size is valid when Array Type is RAID 0 or RAID 0+1.
n Auto Rebuild is valid when Array Type is RAID 1 or RAID 0+1.
n Source Disk is valid when Array Type is RAID 1 or RAID 0+1 and Erase
Partition is disabled.
n Check “Erase Partition” to erase partition table or uncheck “Erase
Partition ” not to erase partition table. If there is an Array of RAID 1 or
RAID 0+1, “Erase Partition” can’t be modified.
n If “Erase Partition” is unchecked, the “Source” must be assigned.
RAIDExpress 133 RAID USER MANUAL
84
Delete Disk Array
Click the “Start Menu” at the left bottom on the RAID Manager control panel then
choose “Delete Disk Array” to delete disk array.
l Available Arrays: List existing arrays.
l Selected Arrays: Arrays will be deleted.
l Erase Partition: Check to erase partition table.
l Click “Delete” to delete disk arrays.