Syba SB-ATA8212-133R - Manual (Page 15)

RAIDExpress 133 RAID USER MANUAL
25
If your RAID Mode selection is Mirror or Stripe + Mirror and you choose not to delete
the boot sector of the array, the following window will appear to ask whether you want
to rebuild an array. If you choose “Y”, the Rebuild RAID Menu will appear. (Please
refer to page 30.)
If you choose not to rebuild this array for the time being, the RAIDExpress 133 card
cannot read data correctly because the data is inconsistent in the mirrored hard
RAIDExpress 133 RAID USER MANUAL
26
drives. Thus, the following window will appear.
Please press arrow keys ↑ and ↓ to highlight your selection and press the “Enter”
key to select the source disk(s) then the setting will be finished and the screen will go
back to the Define RAID Sub-Menu automatically. This array ’s setup is completed.
You can press the “Esc” key to go back to the Define RAID Menu on page 21.