Soleus GPS Sole (SG007) - Manual - Manual (Page 9)

RDY13
HRM SET:
Press S5 while HRM SET is blinking. The watch will display HR ZONE number.
Press S1/S11 to change the setting.
Press S5/S7 to set the LOW limit.
Press S1/S11 to change the LOW limit setting.
Press S5/S7 to set the HIGH limit
Press S1/S11 to change the value
Press S5/S7 to set ZONE ALERT ON or OFF
Press S1/S11 to change the setting
Press S5/S7 to confirm and go back to HRM SET screen.
Press S7 to exit.
General Operations
The watch has the following main modes: Time, Run, Chronograph, Timer. HRM, Data,
Alarm and Set modes. Press S7 to scroll through these modes.
Shortcut: Press S1 or S7 will change mode from
TIME to RUN mode.
EL backlight:
This watch has a Night mode function. Following are the options in SET mode and their
functions:
10 SECONDS – Press S11 will turn ON the Light for 10 seconds.
20 SECONDS – Press S11 will turn ON the Light for 20 seconds.
NIGHT ON – Light will continuously ON when GPS is ON and CHRONO is running within the
preset time period from 5 pm to 7 am. Outside the preset time period, pressing any button will
turn ON the El for 10 seconds.
The User’s can opt to manually set the Night time (Start and End time). Please refer to SET
mode (for Night ON setting option) in the later page of this manual .
Vibration Alarm function
The vibration Alarm function is coupled with the Chime and Alarm function. Whenever you
hear a beep sound or an Alarm sound, you will also feel the vibration alarm. For example:
• If the CHIME is ON, you will hear a beep sound and feel the vibration alarm every
time you push any key.
• During alarm time, the alarm sounds and the vibration alarm is also activated.
• During Auto lap, if the auto lap Alert is ON, you will hear the beep sound and also
feel the vibration alarm.
GPS Sole