Soleus GPS Sole (SG007) - Manual - Manual (Page 12)

RDY13
CONTRAST setting in TIME mode:
Press S5 while CONTRAST is blinking. Contrast percentage will start to blink.
Press S1/S11 to change to your desired value. LCD Contrast range is from 10 to
100%.
Press S5/S7 to exit to CONTRAST setting screen
CHIME setting in TIME mode:
Press S5 while CHIME is blinking. The watch will display CHIME ON.
Press S1/S11 to change to CHIME OFF or ON.
Press S5/S7 to confirm and exit to CHIME setting screen
When Chime is ON, there is beep sound and vibration alert every time you push a
button.
DATA mode
Press S7 from HRM mode to enter DATA mode. The watch will momentarily display
DATA and then display the data files. The file counter will be flashing.
Press S1 to select which file to view. Notice the flashing number will change and will
loop back to the first file after reaching the last file.
Press S5 to enter. The watch will display START/ END/ DIST.
Press S1/S5 to view START TIME/ END TIME/ DISTANCE/ CHRONO/ Ave PACE/ Max
PACE/ Ave SPEED/ Max SPEED/ Ave HRM/ Max HR/ IN ZONE time/ individual LAP
times/ Individual LAP distances. Press S11 to reverse the sequence
When you are in the LAP #/ LAP distance/ LAP time screen, the lap # is flashing.
• Press S1/S11 to view the details of other lap numbers
• Press S5 to go to VIEW/ DEL/ DEL ALL screen.
When VIEW /DEL / DEL ALL sub menu will display, Press S1 to select which action you
want to do.
Press & hold S5 to confirm and execute the action.
Press S7 to exit
GPS Sole