Soleus GPS Sole (SG007) - Manual - Manual (Page 14)

RDY13
MANUAL setting:
• Press S5 while MANUAL is blinking. The HOUR digit will start to blink.
• Press S1/S11 to change the hour.
• Press S5 to set the MINUTE. Minute digit will start to blink.
• Press S1/S11 to change the minute.
• Press S5 to set the SECONDS. Second digits will start to blink.
• Press S1/S1 to zero the seconds. If the value is more than 30, 1 minute will be
added to minute digits.
• Press S5 to set the YEAR. Year digit will start to blink.
• Press S1/S11 to change the year.
• Press S5 to set the MONTH. Month digit will start to blink.
• Press S1/S11 to change the month.
• Press S5 to set the DATE. Date digit will start to blink.
• Press S1/S11 to change the day.
• Press S5 to set the 12H/24H. 12H or 24H digit will start to blink.
• Press S1/S11 to change the value.
• Press S5 to set the M-D or D-M format setting
• Press S1/S11 to change the setting
• Press S5 to confirm. The watch will go back to TIME setting screen.
Setting the UNIT:
Press S while UNIT is blinking. KM or MI will start to blink.
Press S1/S11 to change the value.
Press S5 to confirm and the watch will go back to UNIT setting screen.
Setting the User’s information:
Press S5 while USER is blinking. MALE or FEMALE will start to blink.
Press S1/S11 to change the gender.
Press S5/S7 to set the AGE. Age digits will start to blink.
Press S1/S11 to change the age digits.
Press S5/S7 to set the WEIGHT. Weight digits will start to blink.
Press S1/S11 to change the weight digits.
Press S5/S7 to set the HEIGHT. Height digits will start to blink.
Press S1/S11 to change the height digits.
Press S5/S7 to confirm and the watch will go back to USER setting screen.
Setting HRM:
Press S5 while HRM is blinking. ZONE 1 will start to blink.
Press S1/S11 to change the zone. There are 3 preset zones
Press S5 and the watch will display the LOWER limits of the selected zone. LOW limit
digit will start to blink.
Press S1/S11 to change the low limit value.
Press S5 to confirm. High limit digit will start to blink.
Press S1/S11 to change the high limit value.
Press S5 to confirm. The watch will display ZONE ALERT ON or OFF.
Press S1/S11 to change ON to OFF or vice versa
Press S5 to confirm and the watch will go back to HRM setting screen.
Setting HRM LINK: This is where you LINK your HR belt to the GPS watch
Press S5 while HRM LINK is blinking. Make sure you are properly wearing the HRM
belt on your chest. The watch will start to search for the HRM signal from the HRM belt.
Within 1 minute of searching, the watch will display your Heart Rate and % Max.
The watch will automatically go to HRM mode.
If the LINK fails, it will display FAIL. Please try linking again.
Setting the NIGHT mode:
Press S5 while NIGHT is blinking. 10 sec will start to blink.
Press S1/S11 to change to 20 sec or NIGHT ON.
While on 10 SEC or 20 SEC setting, Press S5 to accept the setting and go back to
NIGHT setting screen.
Press S5 to set the START and END time for continuous light ON. NIGHT START
TIME will start to blink.
Press S1/S11 to change to NIGHT START TIME. 3 seconds auto or press S5, the
HOUR digit will start to blink.
Press S1/S11 to change the hour setting.
Press S5 to change the MINUTE. Minute digits will start to blink.
Press S1/S11 to change the minute setting.
Press S5 to go back to NIGHT setting screen.
Light conditions for the various night mode settings:
10 SECONDS – Press S11 will turn ON the Light for 10 seconds.
20 SECONDS – Press S11 will turn ON the Light for 20 seconds.
NIGHT ON – Light will continuously ON when CHRONO is running within the preset duration
time (5:00 pm to 7:00 am). However, the User can opt to manually set the Night time (Start
time and End time).
Setting the CONTRAST (LCD contrast):
Press S5 while CONTRAST is blinking. 50% will start to blink.
Press S1/S11 to change to your desired value. LCD Contrast range is from 10 to
100%.
Press S5/S7 to exit to CONTRAST setting screen
Setting the Chime:
Press S5 while CHIME is blinking. The watch will display CHIME ON.
Press S1/S11 to change to CHIME OFF or CHIME ON
Press S5/S7 to confirm and exit to CHIME setting screen
Note: When Chime is ON, there is an hourly Chime and the Key tone will automatically ON.
There is also a confirmation sound every time you press a button. The Chime icon also
appears in all modes. If Chime is OFF the Key tone will automatically OFF.
GPS Sole