Soleus GPS Sole (SG007) - Manual - Manual (Page 13)

RDY13
Data numbering system/ Legend:
Following is the data numbering system.
Sample data number: D12 – 05 11 17 – 2 03 G
D12- Total number of files saved (12)
05 – File counter
11 - Month
17 - Day
02 – Related to Time 2, 1 for Time 1
03 - File number of the day
G – GPS workout, H for Indoor workout
Useful DATA information:
o 15 hours track record can be saved in memory
o Maximum of 30 data files can be saved.
o 100 LAPS maximum for each data file. If the Lap memory is already full, the watch
will display LAP FULL. If FILE memory is full, the memory will be managed in First
in- First out basis. The oldest file will be automatically deleted and replaced by the
latest file.
o Speed range : 0 to 999.9 KPH (MPH)
o Distance range: 0 to 9999.99 KM (Miles)
o Chrono range: 0 to 99:59:59 hours
o Heart Rate range: 30 to 240 BPM
o Calorie range: 0 to 99999 KCAL
ALARM mode
Press S7 from DSATA mode to enter ALARM mode. The watch will display the alarm view.
The watch has five alarms that can be set individually. Press S5 to view Alarm 1 to Alarm 5.
Press S1 to turn ON or OFF the selected alarm. Alarm will sound for 20 seconds during alarm
time. Pressing any button will stop the sound without the button function. When any 1 alarm
is ON, Alarm icon will be displayed in TIME mode and ALARM mode.
Setting ALARM in ALARM mode:
Press and hold S11 and the watch will display HOLD TO SET. AL-1 will start to blink.
Press S1/S11 to toggle through Alarm 1 to alarm 5. The watch has 5 alarms which
can be set individually
Press S5 to set the selected Alarm number. The HOUR digit will start to blink.
Press S1/S11 to change the hour digit.
Press S5 to confirm and set the MINUTE digit. The minute digit starts to blink.
Press S1/S11 to change the minute digit.
Press S5 to confirm and set the T1 or T2 setting. T1 or T2 starts to blink. The alarm
time will be referred to Time 1 or Time 2.
Press S5 to confirm. Alarm ON or OFF will start to blink.
Press S1/S11 to change the setting.
Press S5 to confirm and go back to HOUR setting screen
Press S7 to exit
SET mode
Press S7 from ALARM mode to SET mode. 1.5 seconds later the watch will display the
setting options. The ff. sequence are as follows; AUTO LAP, TIME, UNIT, USER, HRM, HRM
LINK, NIGHT, CONTRAST, CHIME, ALARM, TIMER, and VIEW. Press S1/S11 to toggle
trough these parameter. Press S5 to enter selected parameter to set. Press S1/S11 to
change values. Press S7 to exit setting to Time mode.
Setting the Auto Lap:
While AUTO LAP is blinking, Press S5 to set. 1.0 KM will start to blink
Press S1/S11 to change values. Preset range for auto lap is 0.4, 1, 2, 3, 4, 5 KM.
Default value is 1 KM, ON
Press S5/S7 to confirm setting and exit setting screen.
SETTING THE TIME:
TIME 1/ TIME 2 setting:
Press S5 while TIME is blinking. The watch will display TIME1
Press S1/S11 to change TIME1 or TIME 2.
Press S5 and the watch will display GPS / MANUAL. You have two options in
setting the watch, GPS or MANUAL. In manual setting, you can manually set the
time. If you select the GPS option, the watch will be automatically set based on the
data and time data from GPS satellites.
Press S1/S11 to choose between AUTO and MANUAL
GPS setting:
•
Press S while GPS is blinking. The watch will display the time zone.
• Press S1/S11 change the time zone. There are 36 city codes to choose from.
• Press S5 to set DST ON or OFF.
• Press S1/S11 to change the setting
• Press S5 to set 12H/ 24H
• Press S1/S11 to change the values
• Press S5 to set the M-D or D-M format
• Press S1/S11 to change the setting
• Press S5 to confirm. And the watch will go back to TIME setting screen.
GPS Sole