Soleus GPS Sole (SG007) - Manual - Manual (Page 6)

RDY13
6.2.3) Press S11 to take manual Lap. The Lap number/ Lap time, & Split Time will
display for 10 seconds and then continue running.
(The watch will also take Auto-lap based on the Distance set in Auto Lap setting).
6.2.4) While the chronograph is stopped, Press and hold S1 or just press S11 to save
the file. The watch will display the saved file number and go back to GPS GO
(with GPS signal) or INDOOR (no GPS signal) start screen.
6.2.5) Press S5 to change views in Line 2. You can select either Distance, Pace,
Speed, HRM, Calorie or Clock to display in Line 2.
6.2.6) Press S5 to view your current data before saving while the chronograph is
stopped.
Following are the information as you press S5:
6.3) Using TIMER mode:
RUN mode and TIMER mode has the same CHRONO counter. When the chronograph is
started or stopped in RUN mode, the same thing happens in Chronograph mode. The watch
has 6 interval timers which can be set individually. Go to SET mode/ TIMER to set the timers.
You can also press & hold S11 to enter Timer setting mode.
6.3.1) Press S7 from CHRONO mode to go to Timer mode.
a. If GPS is initially OFF, the watch will automatically search for GPS signal. It
will then display the remaining battery level, remaining Track memory, and
then GPS GO start screen (if Satellite signal already received) or INDOOR
start screen ( if no GPS signal received).
b. If GPS is already ON, press S5 the watch will go directly to GPS GO start
screen.
GPS Sole