Soleus GPS Sole (SG007) - Manual - Manual (Page 5)

RDY13
RUN SETTING mode:
While the chronograph is in reset and not running, you can set the Auto lap, Units, User or
View in Rrun mode. Follow the steps below:
Press and hold S11 and the watch will display HOLD SET. 2 to 3 seconds later it will
display AUTO LAP blinking.
Press S1/S11 to select between AUTO LAP, UNIT, USER or VIEW to set.
Press S5 to enter selected parameter to set.
• AUTO LAP setting:
o Press S5 while AUTO LAP is blinking. Auto lap number will start to blink
o Press S1/S11 to change the setting. Auto lap setting range: 0.4, 1,2,3,4,
and 5 KM. Default value is 1 KM.
o Press S5/S7 to set the ALERT ON or OFF.
o Press S1/S11 to change the setting
o Press S5/S7 to confirm new setting and exit setting screen.
o Press S7 to exit
• UNITS setting:
o Press S5 while UNIT is blinking. The unit KM or MI will start flashing.
o Press S1/S1 to change the unit.
o Press S5/S7 to confirm new setting and go back to UNIT setting screen
o Press S7 to exit
• USER setting:
o Press S5 while USER is blinking. MALE will start blinking
o Press S1/S11 to change the gender
o Press S5/S7 to set the AGE.
o Press S1/S11 to change the age
o Press S5/S7 to set the WEIGHT
o Press S1/S11 to change the weight
o Press S5/S7 to set the HEIGHT
o Press S1/S11 to change the height
o Press S5/S7 to go back to USER setting screen
o Press S7 to exit.
• VIEW setting:
o Press S5 while VIEW is blinking. The watch will display VIEW/DIST/
CHRONO. (CHRONO is blinking in line 3)
o Press S1/S11 to change the information in line 3. You can select
Chronograph, Distance, Pace, Speed, HRM, Calorie, or Clock.
o Press S5 to enter. Line 2 will start to blink.
o Press S1/S11 to change the information displayed in Line 2. You can select
Chronograph, Distance, Pace, Speed, HRM, Calorie, or Clock.
o Press S5 to go back to line 3 setting.
o Press S7 to exit.
6.2) Using Chronograph mode:
RUN mode and CHRONOGRAPH mode has the same CHRONO counter. When the
chronograph is started or stopped in RUN mode, the same thing happens in
Chronograph mode.
6.2.1) Press S7 from RUN mode to go to CHRO mode.
a. If GPS is initially OFF, the watch will automatically search for GPS signal. It
will then display the remaining battery level, remaining Track memory, and
then GPS GO start screen (if Satellite signal already received) or INDOOR
start screen ( if no GPS signal received).
b. If GPS is already ON, press S5 the watch will go directly to GPS GO start
screen.
6.2.2) Press S1 to START / STOP / RESTART.
GPS Sole