HCO BG30L Manual - Manual (Page 9)

3 - Quick Introductions
- 7 -
3 Quick Start
3.1 Install Micro SD card and SIM card
Open the battery cover. Insert Micro SD card and SIM card into the card slot
according to the direction shown.
3.2 Insert the battery and Power on
Open the battery cover. Find the spare lithium battery connector and connect
 In this manual, we will use AT&T setup parameters as sample. If
you are not using AT&T, you will need to contact your wireless
carrier for the correct parameters.
 In this manual, 1234567890 is the master number. 1234567891,
1234567892 and 1234567893 are normal user. You will need to
change them to the correct number you are using.
 You must set a master number.
 You must set the network parameters for MMS, SMS and e-mail.
 You must set at least one receiving phone number or one
receiving e-mail address.