HCO BG30L Manual - Manual (Page 21)

4 – Camera Setup
- 19 -
number.
If success, you will receive a reply SMS: Arm mode is active!
If fail, you will receive a reply SMS: Command error! Please check again.
Method 2:
Use the remote control
You can press the button A on the remote to arm the camera.
4.12 Enter Disarm Status
There are two ways to disarm the camera:
Method 1: Edit SMS #D# and send to your camera’s SIM card.
If success, you will receive a reply SMS: Disarm mode is active!
If fail, you will receive a reply SMS: Command error! Please check again.
Method 2:
Use the remote control
You can press the button D on the remote to disarm the camera.
4.13 Check camera settings
There are two ways you can check the camera settings:
Method 1:
Send SMS command #L# to your camera’s SIM card phone
number.