HCO BG30L Manual - Manual (Page 26)

4 – Camera Setup
- 24 -
press OK. If success, New Password Set Success will shown on the screen.
4.17 Get help
Method
: Send SMS command
Send #H# to your camera’s SIM card phone number.
If success, you will receive a reply SMS: A: Arm, D: Disarm, H: help, L:
look over settings, T: take photo.
4.18 Use the Remote control
Before you can use the remote, you will need to add the remote control(s) to
the camera. This can be done through the camera menu. Turn on the
camera, press LEFT button and enter the study code menu. Choose RCH,
press OK button. You will be asked to trigger the remote control you want to
add. Press the button A on the remote control. When it's successful, there
will be a * before RCH.