HCO BG30L Manual - Manual (Page 23)

4 – Camera Setup
- 21 -
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Timer
Switch
Off On
The camera will be awoken up at
certain time duration in a day. In the
rest of the time the camera is shut off.
RGB Set Off On R:0-9;G:0-9;B:0-9;
Password Off ON, set
This password is used to lock or
unlock the camera’s control panel.
Default
Set
Restore customer settings to default
values.
 Photo Burst
It means Continuous Capturing Number after each trigger in camera mode. It
has nine values: 1-9 Photos.
 PIR Interval
It means that how long the PIR (Passive Infrared motion sensor) will be
disabled after each trigger in ON mode. During this time, the PIR of the
device will not react to the motion of human (or animals). The minimum
interval is 0 second which means the PIR works all the time. The maximum
interval is 1 hour which means the PIR will be disabled for 1 hour after each
trigger. The default value is 1 minute. Press ◄ or ► to decrease or increase
the value.
 Timer
This defines a certain time period in a day the camera can be triggered. The
rest of the time period the device is shut off. The effective value range from
00:00:00 to 23:59:59. Timer switch OFF means the camera works all the
time. Timer switch ON means the camera works only during the time period
set.
Method 2:
Send SMS command: