HCO BG30L Manual - Manual (Page 15)

4 – Camera Setup
- 13 -
4.3 User authorization
There are two levels of users: Master and Normal users. Each user has a
different authorization level:
Functions User Level
Set master number Only Master’s password
Set master ‘s password Master
Set camera parameters Master
Set normal user Master
Receive emergency calling Master, Normal user
Send SMS for on spot picture Master, Normal user
Call the camera to listen in live voice Master, Normal user
Receive MMS when triggered Master, Normal user
Check camera status Master, Normal user
Get help information Master, Normal user
4.4 Set Master Number
You should set a master number when you first use the camera. There are
two ways to set the Master Number:
Method 1: Send SMS command:
Send #BG30L#5555#1234567890# to your camera’s SIM card phone
number. 5555 is the original master’s password. Please note all the SMS
commands should begin and end with “#”. 1234567890 is the Master
Number you want to use. If success, you will receive a reply SMS: Dear
master, your number is 1234567890
. If fail, you will receive a reply SMS:
Please check the password.
Method 2: Editing the profile.txt:
After you open the profile.txt in a notepad, find the to MasterNum= line and