HCO BG30L Manual - Manual (Page 12)

3 - Quick Introductions
- 10 -
Receiving e-mail addresses:
Sending E-mail parameters (Default settings can be used).
Step 3: Choose “Send Mode”
There are 3 mode: Number (Send MMS to mobile phone), e-mail (Send
images to E-mail address), and Local (Just store images in the Micro SD
card, do not send out). For the first time use, we suggest you choose
“Number” to test if you can get MMS.
Step 4: Go to Arm Status
Arm status is the live status. The camera can be set to ARM by 2 ways:
 When the camera is ON, don’t press any key for 1 minute, the camera
will automatically switch to Arm Status.
 Use the remote control, press “A”, then it will go to Arm Status
immediately.
SendEmailAddr=
SendEmailPassword=
SendEmailPort=
SendEmailServer=
ReceiveEmail1=
ReceiveEmail2=
ReceiveEmail3=
ReceiveEmail4=
GPRSAPN=wap.cingular
[email protected]
GPRSPassword=CINGULAR1