HCO BG30L Manual - Manual (Page 22)

4 – Camera Setup
- 20 -
If success, you will receive a reply SMS: Email address, password, port,
SMTPServer,protocol, email1,email2, email3,email4, mms serve net
address，server ip，port， protocol，Number1，Number2，Number3，
Number4，Alarm:on/off, Interval 0m:0s,photo Burst 1, Send Mode:
Local/Number/Email, Work Day 1111111, Timer: off/on 09h00m:17h00m,
Date Time:2011/7/12 18:12:12,Active Zone:0111111
Method 2:
On the camera display
You can press OK button when you are at Home screen (before enter the
Menu), it will show you the current MMS settings for you to check.
4.14 Set camera parameters
Method 1:
Via Setting menu
To view the camera settings menu, press MENU in the TEST mode. The
settings menu will be shown on the LCD.
Items Default Options Description
Set Clock Enter Set camera date and time.
Format Enter
Format the SD-card. All images and
videos in the SD-card will be deleted.
PIR
Interval
1 Minute
0–59
seconds,
1-60 minutes
Choose how long the camera will
stop functioning after each triggering.
The camera’s PIR will be disabled
during this interval.
Photo
Burst
1 Photo 2 -9Photos
Choose the continuous shooting
numbers after each triggering.
Send
Mode
Number Email\Local
Number: Send MMS to preset phone
number; Email: Send picture to
preset email address; Local: Just take
pictures, don’t send out.
Work Day All Sunday Choose which day the camera works.