HCO BG30L Manual - Manual (Page 25)

4 – Camera Setup
- 23 -
4.15 Format Micro SD card
Method 1 : Send SMS command
Send SMS #F# to your camera’s SIM card phone number.
If success, you will receive a reply SMS: Format SD card successfully!
If fails, you will receive a reply SMS: Format SD card failed!
Method 2
: Set in camera menu
Enter the camera menu, scroll down to Format. Press OK and then highlight
(by pressing Left or Right key) Yes, press OK again to confirm. If format
success, Format Successfully will shown on the screen.
4.16 Set master’s passwords
Method 1:
Send SMS command:
Send SMS #P#your password# to your camera’s SIM card phone number.
If If success, you will receive a reply SMS: The password is successfully
changed to 4321.
Method 2:
Set in camera menu
Enter the camera menu, scroll down to Password. Use Left or Right button to
switch between On, Off and Set. Highlight Set and press OK. You will be
asked to input your old password. If you never changed your password
before, the default password is 5555. Input your old password and press OK.
Input your new password and press OK. Input your new password again and