HCO BG30L Manual - Manual (Page 14)

4 – Camera Setup
- 12 -
4 Camera Setup
4.1 Mount the camera
The camera features a tripod mounting hole in the bottom with a standard
screw thread. You can mount it to any suitable surface. You can press
“ ”button to turn on the laser pointer to help with your mounting.
4.2 Camera status
From the basic operations of the camera in previous chapter, we know that
the camera has three basic operation statuses:
 Setting Status: You can change or check camera settings in this status.
You can also change or check the settings via SMS.
 Arm Status: It’s the live status In ARM Status, when it’s triggered, the
camera will do the following:
 Only insert Micro SD card: It will take a picture and store the picture
in the Micro SD card only.
 Only insert SIM card: It will take a picture and send out via MMS or
email only.
 Insert both Micro SD and SIM card: It will take a picture, store in the
Micro SD card and send out to your cell phone or your email.
 Disarm Status: The camera will not be triggered in disarm status.