HCO UM562 - Manual

HCO UM562 Quick Setup Guide
Getting the SIM Card for Your Camera:
We recommend that you go to an AT&T or T-Mobile company
store and ask for a SIM card with a basic prepaid plan and
unlimited MMS messages. Plans should be no more than $19.99
per month. Make sure they activate your SIM card at the store.
Setting Up Your UM562 Camera for Sending Pictures:
1. Open your camera.
2. Insert your SIM card and a clean (formatted) SD card into their
appropriate places on the camera.
3. Once that is done, look for the slider switch on the lower left
side of the camera. It should have three options: “OFF”,
“SETUP”, or “ON”. Push to “SETUP”.
4. Now you should see your screen say “Checking” then “Search
Network”.
5. Next hit the “MENU” button on your camera.
6. Once your menu screen pulls up, using your arrow buttons,
move over to the “GSM” tab. Then scroll down until you see
the “Download Tool” option.
7. Hit the “OK” button on your camera, and the UOV Setup tool
you need to continue setup will be downloaded to your SD
card.
8. Turn off the camera, and eject your SD card. Now insert it into
your computer’s SD card slot.
9. Once you pull up the SD card folder on your screen, right-click
on a WinZip folder called “GSMSetup”, and choose “Extract
All…”.
10. Before hitting “Extract” at the bottom of the window, make sure
that in the text box to the left of “Browse…”, you delete
everything except the drive letter like so:
 Here, the drive letter for your SD card is “G:\” but
depending on your computer, it may be a different letter.
 DO NOT modify the drive letter.
 Now hit “Extract…”
11. Now the following files will be in your SD card folder:
12. Double-click on “UOV Setup”, and this screen appears:
13. For now, make sure that you setup with these values:
 “Send Mode” should be set to “Instant” with “Max Num” set
to however many pictures you want to receive in a day,
going anywhere from 0-99 pictures.
 Set “Send Via” to “MMS”.
14. After that, simply choose your country, cell phone operator,
and whether or not you would like to receive messages
through your phone, email, or both. Enter phone and email
addresses as needed.
 Make sure the phone number is 10 digits with no spaces
or dashes.
 Again, do not change the drive letter.
15. Hit “OK”, and now your settings should be set up.
16. Remove the SD card from your computer and reinsert it into
your camera.