HCO BG30L Manual - Manual (Page 27)

4 – Camera Setup
- 25 -
Setting Status Study Code Menu Study Code Menu
You can use the remote control to easily Arm (button A) or Disarm (button D).
Also you can dial the emergency numbers via button C in case of emergency.
Press button B can open or close the laser (You can easily mount the
camera with the help of the laser point.).
 Button A : Arm the camera
 Button D :Disarm the camera
 Button C :Emergency call button
 Button B :Laser point
4.19 Load or remove a wireless sensor
Any 433MHz wireless sensor, such as infrared body sensor, wireless door
magnet, wireless smoke detector, etc. can be set as an alarm sensor of the
camera.
Please follow the instruction below to load or remove a wireless sensor:
1. Power on the wireless sensor.
2. Turn on the camera, press LEFT button and enter the study code
menu. Choose Zone1 or Zone2, press OK button, then trigger the
wireless sensor. When it's loaded successfully, there will be a *before
zone1 or zone2.