beautypg.com

E-flite Piper Pawnee 15e ARF User Manual

Page 34

background image

34

E-flite Piper Pawnee ARF Assembly Manual



13. Apply a few drops of thin CA to each of the

holes drilled in the previous step to harden the

surrounding wood.



14. Mount the rudder control horn using a #1 phillips

screwdriver and two 2mm x 15mm machine screws.



15. Use a felt-tipped pen to mark the pushrod where it

crosses the outer hole of the rudder servo arm.



16. Bend the pushrod wire 90-degrees at the mark made

in the previous step.