Gui installation and operation – Barco MatrixPRO HD/SD-SDI User Manual
Page 43

MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide
33
4. GUI Installation and Operation
Control GUI Installation
2. Click Next to display the Choose Destination Dialog:
Figure 4-2. Choose Destination Dialog
The default install directory is C:\Folsom Research\MatrixPRO\MPControl.
~
Click Browse to select a different directory, if desired.
3. Click Next to display the Start Installation Dialog.
Figure 4-3. Start Installation Dialog
The setup application is now ready to install the MP Control application.
This manual is related to the following products: