Banner SI-QM100 Locking Style Switches - Manual (Page 12)

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]
Machine Safety Switches –
SI-LS42 Series Locking Style Switch
®
P/N 60099 rev. D
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace,
free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty
does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or
implied.
Accessories
Replacement Parts
Description Model
Used with
Switch Models
Dimensions
½"-14 NPT
Plastic
Conduit Adaptor
SI-QS-M20 All
Replacement
Terminal Cover
SI-LS42-COVER All N/A
25.0 mm
(0.98")
M20 x 1.5
24.0 mm
(0.94")
1/2"-14 NPT
Internal Thread
Cable Glands
Size Model
Used with
Switch Models
For Cable
Diameters
Dimensions
M20 x 1.5
Plastic
SI-QS-CGM20 All
5.0 to 12.0 mm
(0.20" to 0.47")
M20 x 1.5
25.0 mm
(0.98")
37.0 mm
(1.46")
WARNING . . .
Spare actuators must NEVER be used to bypass or otherwise defeat the protective function of a safety switch. To do so may create an
unsafe situation which could lead to serious injury or death.
Accessory Actuators
Description Model
Used with
Switch Models
Rigid In-line metal actuator used for doors or
covers. Slide-bolt design for use in heavy-duty
applications where alignment is difficult to maintain.
SI-QM-SB All