Banner engineering corp limited warranty – Banner Compact Plastic Style Safety Interlock Switches User Manual

Page 8

Model

Size

Thread Conversion Dimensions

Used With

SI-QS-M20

½"-14 NPT Plas-
tic

M20 x 1.5 to ½"-14
NPT

25.0 mm

(0.98")

M20 x 1.5

24.0 mm

(0.94")

1/2"-14 NPT

Internal Thread

SI-QS90 Safety Interlock
Switches
SI-LS100 Safety Interlock
Switches
SI-LS31 Safety Interlock
Switches
SI-LS42 Safety Interlock
Switches
RP-LS42 Rope Pull Switches

Replacement Actuators

Type

Model

Application

SI-QS-SSA-3 (Inline)
SI-QS-SSA-2 (Inline)

For doors or covers with a radius of 150 mm (6"), or greater. (Pictured
from left to right: -SSA-3 and -SSA-2).

SI-QS-SSU (Flexible)

For hinged doors with a radius of 50 mm (2") or greater. Flexes in four
directions. The actuator is die-cast steel.

SI-QS-SSUA (Adapter
Plate)

Clear acrylic adapter plate used to retrofit SI-QS-SSU to older flexible
actuators SI-QS-HMA and SI-QS-VMA.

WARNING: Spare Actuators
Spare actuators must NEVER be used to bypass or otherwise defeat the protective function of a safety
switch. To do so may create an unsafe situation which could lead to serious injury or death.

Banner Engineering Corp Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of
shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned
to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse,
abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (IN-
CLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND
WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL
BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPEN-
SES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY
PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WAR-
RANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or
liabilities relating to any product previously manufactured by Banner Engineering Corp.

Limit-Switch Style Machine Safety Switches