Banner SureCross DX80 Wireless Networks - Manual (Page 6)

Banner Engineering Corp. • Minneapolis, MN U.S.A
www.bannerengineering.com • Tel: 763.544.3164 6
P/N 129323 rev. E
SureCross™ DX80K Wireless Configured FlexPower™ Kit
General
Power* Gateway and Node: +10 to 30V dc (For European applications: +10 to 24V dc, ± 10%)
FlexPower™ Node: +3.6 to 5.5V dc low power option
Power Consumption Less than 1.4 W (60 mA) at 24V dc
Mounting #10 or M5 (M5 hardware included)
M5 Fasteners Max. Tightening Torque 0.56 N•m (5 in•lbf)
Case Material Polycarbonate
Weight 0.26 kg (0.57 lb.)
Indicators Two LED, bi-color
Switches Two Push Buttons
Display Six Character LCD
External Cable Glands Four PG-7 type, One 1/2-inch NPT type
Cable Glands Max. Tightening Torque 0.56 N•m (5 in•lbf)
* For European applications, power the DX80 from a Limited Power Source as defined in EN 60950-1.
Specifications
Radio
Range* 900 MHz: Up to 4.8 kilometers (3 miles)
2.4 GHz: Up to 3.2 kilometers (2 miles)
Transmit Power 900 MHz: 21 dBm Conducted
2.4 GHz: 18 dBm Conducted, ≤ 20 dBm EIRP
Spread Spectrum Technology FHSS (Frequency Hopping Spread Spectrum)
Antenna Connector Ext. Reverse Polarity SMA, 50 Ohms
Antenna Max. Tightening Torque 0.45 N•m (4 in•lbf)
Link Timeout 64 seconds
* With the standard 2 dB antenna. High-gain antennas are available, but the range depends on the environment and line of sight. To determine the range of your wireless
network, perform a Site Survey.
Many parameters are configurable. The values in the tables represent factory defaults unless otherwise noted.
Inputs
Discrete Inputs Two Sinking
Discrete Input Rating 3 mA max current at 30V dc
Discrete Input 1,2 Sample Rate 62.5 milliseconds
Discrete Input 1,2 Report Rates On Change of State
Discrete Input ON Condition Less than 0.7V
Discrete Input OFF Condition Greater than 2V or Open
Analog Inputs Two, 0 to 20 mA
Switched Power for Analog Input 1 15V
Analog 1 Sample Rate, Report Rate 15 minutes, 15 minutes (switch configurable)
Analog 2 Sample Rate 1 second
Analog 2 Report Rate 15 seconds or On Change of State (1% change in value)
Accuracy 0.1% of full scale +0.01% per ºC