Metrohm 850 Professional IC Anion MSM-HC MCS Prep 1 - Manual (Page 34)

3.5 Capillary connections in the IC system
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
24 ￭￭￭￭￭￭￭￭
850 Professional IC – Anion MSM-HC – MCS – Prep 1
3.5 Capillary connections in the IC system
This chapter contains general information concerning the capillary con-
nections in the IC instruments.
Generally speaking, capillary connections between two components of an
IC instrument are made up of one connection capillary and two pressure
screws with which the capillary is connected to the respective compo-
nents.
4
1 2 3
Figure 6 Connection of capillaries with pressure screws
1 PEEK pressure screw 6.2744.014
Use on the injection valve. 2 Connection capillary
3 PEEK pressure screw, short 6.2744.070
For use on the high pressure pump, the
purge valve, the inline filter, the pulsation
damper, the guard column and the separa-
tion column. 4 PEEK pressure screw, long 6.2744.090
Usage on other components. Is not used on
all instruments.
Note
In order to keep the dead volume as low as possible, capillary connec-
tions should generally be as short as possible.
Note
For an improved overview, capillary and tubing connections can be
bundled with the 6.1815.010 spiral band.
Connection capillary
PEEK capillaries and PTFE capillaries are used in the IC system.