Metrohm 850 Professional IC Anion MSM-HC MCS Prep 1 - Manual (Page 33)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
850 Professional IC – Anion MSM-HC – MCS – Prep 1
￭￭￭￭￭￭￭￭ 23
3 Tubing olive 6.2744.034
For connecting capillaries to the aspiration
side of the peristaltic pump. 4 Pump tubing 6.1826.390
With yellow/orange stoppers. For sample.
5 Pump tubing connection 6.2744.180
With safety device and filter. For connecting
capillaries to the outlet side of the peristaltic
pump. 6 PTFE capillary 6.1803.060
For the transport of the sample to the ultra-
filtration cell.
7 PVDF pressure screw 6.2744.000 8 PTFE capillary 6.1803.080
For the transport of the sample to the waste
container.
9 PTFE capillary 6.1803.050
For the transport of the filtrate to the peri-
staltic pump. 10 Pump tubing 6.1826.320
With yellow/orange stoppers. For filtrate.
11 PEEK capillary 6.1831.060
For the transport of the filtrate to the injec-
tion valve.
12 Pressure screw 6.2744.014
13 PEEK capillary 6.1803.040
Sample outlet capillary.
3.4 Setting up the instrument
3.4.1 Packaging
The instrument is supplied in highly protective special packaging together
with the separately packed accessories. Keep this packaging, as only this
ensures safe transportation of the instrument.
3.4.2 Checks
Immediately after receipt, check whether the shipment has arrived com-
plete and without damage by comparing it with the delivery note.
3.4.3 Location
The instrument has been developed for operation indoors and may not be
used in explosive environments.
Place the instrument in a location of the laboratory which is suitable for
operation, free of vibrations, protected from corrosive atmosphere, and
contamination by chemicals.
The instrument should be protected against excessive temperature fluctu-
ations and direct sunlight.