Metrohm 817 Bioscan - Manual (Page 85)

6.4 Index
817 Bioscan
77
Reference electrode connection 40
Figure...............................................17
Regeneration interval...........................50
Regeneration of separating column....56
Remote cable (6.2141.140)
Connection of sample changer...........22
Remote line connections
12/15
Figure................................................. 5
Remote lines ........................................66
Resolution ............................................62
Return ..................................................71
Rinse with dist. H2O ............................19
Rinse with eluent..................................19
Rinsing
Column ............................................19
Tubing ..............................................19
Rinsing of IC system............................58
Rinsing the polishing disk....................59
RS232 interface
14
Figure................................................. 4
Technical data .................................66
S
Safety specifications............................68
Sample changer
Connection to MIC-8 .......................22
Sample inlet 49 Valve A
Figure...............................................26
Sample inlet 55 Valve B
Figure...............................................26
Sample loop connection 44/47
Figure...............................................16
Sample loop connection 50/53
Valve A
Figure...............................................26
Sample loop connection 56/59
Valve B
Figure...............................................26
Sample outlet 48 Valve A
Figure...............................................26
Sample outlet
54 Valve B
Figure...............................................26
Sample time ..........................................41
sampling frequency .............................50
Scan .....................................................37
Scan cycle ............................................43
Scan mode...........................................47
Scan rate ...............................................43
Scan voltammogram ......................52,53
Screws
36
Check ...............................................17
Selectivity ........................................51,53
Sensitivity ........................................51,53
Sensitivity decreasing ..........................61
Separating column
Protection .........................................55
Separating column
Changing .........................................60
Mounting ..........................................16
Practical notes .................................55
Regeneration....................................56
Separation efficiency .......................55
Storage.............................................55
Separation efficiency............................55
Service.............................................58,64
Servicing...............................................58
Setting up the instrument.....................11
Settings
Mains voltage...................................12
Settings in «IC Net 2.1»
MIC-8................................................21
Shutdown .............................................58
Signal "overload" ..................................62
signal/noise ratio..................................51
SOP ......................................................64
Spacer..................................................59
Spilled chemicals .................................58
Splitting ................................................62
Stacked recorder icons .........................30
Standard chromatogram .....................55
Standard equipment ............................69
Standard operating procedures ..........64
Start pump ...........................................32
................................................45
State .....................................................45
Static charges ........................................9
Stirring of the eluent .............................57
.................................................45
Sunlight ................................................12
Syringe tubing connection
42
Figure ...............................................16
System for sugar analysis – MIC-8......20
System for the analysis of anions
and sugars – MIC-9......................... 24
System overview MIC-9....................... 29
System switch-on ................................ 32
T
t1 ......................................................... 41
t2 ......................................................... 41
t3 ......................................................... 41
Technical data ..................................... 65
temperature ......................................... 35
Temperature ........................................ 48
time interval
t1 ...................................................... 49
t2 ...................................................... 49
t3 ...................................................... 49
Time program for 766 / 788 ........... 23,31
Time program for 817 ......................... 23
Transport ............................................. 11
transport damage................................ 71
Treatment of eluents ........................... 57
Tubing
Rinsing............................................. 19
V
Validation ............................................. 64
Valve ............................................... 38,46
.............................................. 45
Voltage
Technical data................................. 66
Voltammogram.................................... 51
W
Warning ............................................ 8,38
Warranty .............................................. 71
Waste container
Connection ...................................... 18
Waste tubing ....................................... 18
Working electrode
Cleaning .......................................... 59
Working electrode connection 38
Figure .............................................. 17