List of illustrations – Metrohm 817 Bioscan User Manual

Page 7

Contents

817 Bioscan

III

List of illustrations

Fig. 1:

Front of the 817 Bioscan................................................................................... 3

Fig. 2:

Rear of the 817 Bioscan.................................................................................... 4

Fig. 3:

Interior of the 817 Bioscan (with permanently attached accessories)

.. 6

Fig. 4:

Setting the mains voltage ............................................................................... 13

Fig. 5:

Connections at the injection valve of the 2.812.0010 Valve Unit

......... 16

Fig. 6:

Connections at flowcell

............................................................................... 17

Fig. 7:

Connecting up a simple modular IC system
with the 817 Bioscan – MIC 8

..................................................................... 20

Fig. 8:

Connecting up a simple MIC 8 system
including a sample changer

....................................................................... 22

Fig. 9:

Connections with a 817 Bioscan as second detector
with a modular IC system – MIC 9

............................................................. 24

Fig. 10:

Connections of injection valves A and B in the IC Separation
Center (2.733.0120)

..................................................................................... 26

Fig. 11:

Potentials applied during pulsed amperometric detection (PAD).

...... 49

Fig. 12:

Example of a hydrodynamic voltammogram of a
substance (A) with additional presentation of the
measured values for the pure eluent (B)

.................................................. 51

Fig. 13:

Example of a scan of a substance (A) with additional
presentation of the scan of the pure eluent (B)

...................................... 52