Metrohm 817 Bioscan - Manual (Page 50)

3 Operation
817 Bioscan
42
Full scale The full-scale range (operating range) sets
the desired sensitivity for the analog output.
The possible values of the full-scale range
depend on the preset measuring
Range . For
RS232 data (IC Net 2.1), always the maxi-
mum settings should be used.
Offset Offset of the zero point.
Selection:
-50 ... +50 % (in steps of 10 %)
Actual
E1, E2, E3 Display of current potentials in V.
t1, t2, t3 Display of current time durations for poten-
tials in s.
Sample time Display of current sample time in ms.
Oven Display of current oven state.
Range Display of current measuring range.
Full scale Display of current full-scale range.
Offset Display of current offset.
Cycle potentials Graphical display of cycle potentials.
Method Display of potentials set in the Method data
frame.
Actual Display of current potentials.
Sends current parameters immediately to
the 817 Bioscan. Parameters are not stored
in the system file (
*.smt ) as long as the file
is not saved.