Metrohm 885 Compact Oven SC - Manual (Page 26)

3.7 Mounting the safety shield ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16 ￭￭￭￭￭￭￭￭ 885 Compact Oven SC
2 Connect the heating tubing cable to the Outlet heater connector
on the rear of the instrument.
Figure 8 Connecting the heating tubing
Rotate the plug in such a way that the three contact pins match the
alignment of the corresponding openings on the socket. Press the
plug against the socket and rotate the front knurled screw in a clock-
wise direction.
Note
The heating jacket of the heating tubing is heated up to approx.
40…50 °C as soon as the instrument is switched on. This prevents
the condensation of moisture in the tubing when this is expelled
from the sample and transferred with the aid of a carrier gas into a
KF titration cell.
3.7 Mounting the safety shield
Now you can remount the safety shield. Proceed as follows: