Metrohm 885 Compact Oven SC - Manual (Page 25)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
885 Compact Oven SC ￭￭￭￭￭￭￭￭ 15
4 Screw the 6.1805.010 FEP tubing (13 cm in length) tightly onto the
remaining M6 connectors of the drying flasks.
The figure Drying flask on the right-hand side of the instrument dis-
plays the diagram for the tubing.
Note
Tighten the screw connections well by hand.
You can fasten the drying flasks with the 6.2043.005 holding clamps, see
figure.
6.2043.005
3.6 Mounting the heating tubing
6.1830.030
Figure 7 Mounting the heating tubing
Proceed as follows:
1 Screw the M6 connector of the 6.1830.030 heating tubing into
the side opening of the distributor on the guide head.