Metrohm 798 MPT Titrino - Manual (Page 98)

3.2. Remote control commands
798 MPT Titrino
94
&Setup
Object Description Input range Reference
& Root
:
├ Setup Settings for the operating mode
├ .Comport Output of automatic info 1,2,1&2 3.2.2.115.
├ .Keycode Send key code ON, OFF 3.2.2.116.
├ .Tree Sending format of path info
│ ├ .Short Short format of path ON, OFF 3.2.2.117.
│ ├ .ChangedOnly Paths of modified nodes only ON, OFF ditto
│
├ .Trace Message on changed values ON, OFF 3.2.2.118.
│
├ .Lock Lock key functions
│ ├ .Keyboard Lock all keyboard keys ON, OFF 3.2.2.119.
│ ├ .Config Lock key ON, OFF ditto
│ ├ .Parameter Lock key ON, OFF ditto
│ ├ .SmplData Lock key ON, OFF ditto
│ ├ .UserMeth Lock functions
│ │ ├ .Recall Lock “loading” ON, OFF ditto
│ │ ├ .Store Lock “saving” ON, OFF ditto
│ │ ├ .Delete Lock “deletion” ON, OFF ditto
│ └ .Display Lock display function ON, OFF ditto
│
├ .Mode Setting waiting intervals
│ ├ .StartWait Waiting time after start ON, OFF 3.2.2.120.
│ ├ .FinWait Waiting time after run ON, OFF ditto
│
├ .SendMeas Automatic sending of measured values
│ ├ .SendStatus Connect/disconnect sending ON, OFF 3.2.2.121.
│ ├ .Interval Time interval 0.08...4...16200, ditto
│
MPList
│ ├ .Select Selection Assembly, Titrator 3.2.2.122.
│ ├ .Assembly From assembly
│ │ ├ .CyclNo Cycle number ON, OFF 3.2.2.123.
│ │ ├ .V Volume ON, OFF ditto
│ │ ├ .Meas Measured indicator voltage ON, OFF ditto
│ ├ .Titrator From Titrator
│ │ ├ .CyclNo Cycle number ON, OFF 3.2.2.124.
│ │ ├ .V Volume ON, OFF ditto
│ │ ├ .Meas Measured indicator voltage ON, OFF ditto
│ │ ├ .dVdt Volume drift dV/dt ON, OFF ditto
│ │ ├ .dMeasdt Measured value drift ON, OFF ditto
│ │ ├ .dMeasdV 1st deviation of titration curve ON, OFF ditto
│ │ ├ .ERC ERC from DET ON, OFF ditto
│ │ ├ .T Temp.as secondary meas. ON, OFF ditto
│