DJI Z15-BMPCC - Manual (Page 7)

©2014 DJI. All Rights Reserved.
7
Gimbal Description
Ensure nothing blocks servo drive modules during rotation to avoid motor damage.
Clear obstacles or immediately cut power if blockage occurs.
Servo drive module has two motor command input ports and one private encoder port.
HDMI-HD/AV module converts HDMI to HD (or AV) using a cable connected to the camera
HDMI port. It also transforms the TX signal into a record control signal with a record control
cable.
The camera record control cable is removable. Unplug it if record control is not needed.
Servo Drive
Module 1
Pan
±± 360°
Servo Drive
Module 3
Tilt±+ 50°/ -140°
Arrow represents
the lens direction
Camera Mount
Position
Receiver Mount Board
Damping Unit
Lens Retaining Ring
Mount Hole
IMU Module
Camera Mount
Holes
Camera LED
Indicator
AV/HD Switch
HDMI-AV/HD Module
Camera Record
Control Cable
Servo Drive
Module 2
Roll
±± 40°
Motor Input Port
To G6 port of GCU
9-Pin Port
To G9 port of GCU
Gimbal Description