DJI Z15-BMPCC User Manual

Page 14

Zenmuse Z15-BMPCC User Manual

step1: Connect Gimbal Port on air system to G7 port on DJI HD gimbal with supplied Gimbal cable

(DJI HD gimbal).

step2: Connect DBUS port on air system to DBUS port (X2 port) on flight control system. Toggle the

HD/AV switch to the HD position.

step3: Refer to gimbal and flight control system manuals to complete connection.

HD video power cable is included with BMPCC-HD gimbal. Transmit the signal of your

aircraft, connect the RC receiver to the DJI Lightbridge ground system at the same time
that the GCU is connected.

Always connect wireless video transmission module to GCU prior to powering on.
Standard HD video power cable is recommended.
Finish off the other connections according to DJI Lightbridge user manual.

If the gimbal LED indicator continually blinks red, power cycle the gimbal.

The following diagram shows how a video signal is transmitted from the gimbal.

If the video signal does not transmit, check through each step.

Camera

HDMI

HDMI signal

HDMI-HD/AV cable

HD/AV signal

Monitor

Input

Gimbal

HDMI-HD/AV module

HD/AV Video

Power Cable

Self-prepared by user

Wireless video

transmission module

Air unit

Wireless signal

5.8G/2.4G/1.2G

Ground unit

Wireless video

transmission module

9-Pins cable

HD/AV signal

GCU