DJI Z15-BMPCC - Manual (Page 18)

18
©2014 DJI. All Rights Reserved.
PC
Assistant
Tuning
PC Assistant Tuning
Installation and Usage
1. Ensure the most recent drivers are installed correctly. This should have been done before using
the A2 or WooKong-M software.
2. Download the appropriate Assistant installer from DJI.com.
3. Double click the Assistant installer and follow the steps to finish the installation.
4. Run Assistant.
5. Upgrade the firmware or configure parameters using Assistant as needed.
The Assistant installer can be used on Windows XP, Win7, and Win8 (32 or 64 bit).
Basic Setting
You can set transmitter channels for roll, tilt and pan control, and also switch between working
modes during flight. Move your cursor to each area or refer to this manual for more details.