Port description, Gimbal led indicator – DJI Z15-BMPCC User Manual

Page 24

Zenmuse Z15-BMPCC User Manual

Port Description

GCU

ROLL

For roll axis control

TILT

For tilt axis control

PAN

For pan axis control

MODE

For Working Mode switch

SHUT

Reserved channel

AUX1

For camera aperture control

AUX2

For Gimbal orientation (down or forward) switch in FPV Mode

S-Bus Receiver

AUX3

For camera record control

PPM Receiver

1. To wireless video transmission module, transmitting AV or HD signals
2. To DJI Lightbridge, transmitting HD and aircraft control signals

XT60

To battery (To GIMBAL if DJI S800 EVO used)

To Gimbal, transmitting motor command

To Gimbal, transmitting video signal

Micro-USB port: PC connection for configuration and firmware upgrades

CAN-Bus port: Use CAN-Bus to connect GCU to the Flight Control System

Gimbal

HDMI-HD/AV Port

To camera HDMI port

Motor Command Input Port

To GCU G6

9-Pin Cable Port

To GCU G9

Gimbal LED Indicator

Description

LED Indicator

HD mode, HDMI-HD/AV module transmits normally

LED is blinking green.

HD mode, without camera HDMI video input

Green LED is solid on.

HD mode, DJI Lightbridge App video source has been set to “HDMI/AV”

Yellow LED is solid on.

AV mode, HDMI-HD/AV module transmits normally

LED is blinking yellow.

AV mode, without camera HDMI video input

Yellow LED is solid on.

HD video transmission module and gimbal is disconnected

LED is blinking red.

Appendix