DJI Z15-BMPCC User Manual

Page 10

Zenmuse Z15-BMPCC User Manual

The following diagram shows the gimbal mounted on a DJI S1000. You may also mount it to
different landing gear by referring to the diagram.

Ensure the lens is pointing towards the aircraft nose.

Make sure the top and bottom plates of the damping unit stay parallel when mounting.

Prevents stretching and distortion.

Keep overall balance when mounting in order to make sure the center of gravity is

balanced on each of the three axis lines.

The gimbal’s center of gravity has been set from the factory. The center of gravity position

directly determines the gimbal’s overall performance. Do not adjust the gimbal’s center of
gravity by yourself.

The gimbal is highly precise and depends on this precision for the most optimal

performance. Do not remove any screws on the gimbal which may result in inferior
performance or even damage to the gimbal itself.

Do not unplug any cables attached to the gimbal ports or change the mechanical structure.

Make sure the wiring is correct, otherwise, it may lead to abnormal gimbal operation.

For mounting receiver

S1000
Landing Gear

Lens direction

Aircraft nose
direction

step5: Install gimbal on landing gear with mounting brackets. Tighten screws and use thread lock.