In the box, Gimbal ×1, Gimbal control unit (gcu) ×1 – DJI Z15-BMPCC User Manual

Page 4: Lens retaining ring ×1, Mounting bracket ×4, Mounting board for receiver ×1, Cable clamp ×1, Camera mount screw ×2

In the Box

Gimbal ×1

The gimbal includes built-in Z15-BMPCC DJI servo drive
modules and an independent IMU module and HDMI-HD/
AV module.

Gimbal Control Unit (GCU) ×1

Connect the GCU to the Flight Control System using the
CAN-Bus. The GCU will control the gimbal’s pan, roll and
tilt movements.

GCU

ROLL

TILT

PAN

MODE

SHUT

AUX1

AUX2

AUX3

Lens Retaining Ring ×1

Mounting the camera lens.

Mounting Bracket ×4

Mounting the gimbal to landing gear.

Mounting Board for Receiver ×1

Attaching the GCU and providing a convenient mount for
the receiver or other devices.

Cable Clamp ×1

Cable management.

Camera Mount Screw ×2

Standard tripod mount on the camera.

In the Box