Pre -flight check, Check before each flight – DJI Z15-BMPCC User Manual

Page 20

Zenmuse Z15-BMPCC User Manual

Pre -Flight Check

Check Before Each Flight

Gimbal is properly installed and attached to landing gear and the camera is mounted

correctly and securely.

Before powering on, spin the gimbal by hand through the complete rotational axes to

ensure nothing is blocking its movement.

All cables are connected correctly without any plugged in backwards or into the wrong

ports.

AV video power cable is properly soldered and shielded if an AV video transmission

module is used.

Verify transmitter settings.
Camera record control cable is correctly mounted.
Camera menu options and settings are correct.
A proper connection between GCU and RC receiver.
A proper connection between GCU and flight control system.
Latest Flight Control System MC Firmware is installed.

Refer to the Gimbal LED Indicator section in the Appendix for understanding the

connection status between the camera and gimbal.

Refer to the Trouble Shooting section in the Appendix if an abnormal situation occurs.

Pre -Flight Check