DJI Z15-BMPCC - Manual (Page 3)

©2014 DJI. All Rights Reserved.
3
Product Proile
The Z15-BMPCC is a sophisticated, technologically advanced, class leading gimbal designed
specifically for aerial creativity. It has a built-in independent IMU module, special servo drive
module, HDMI HD/AV module, and more. The Z15-BMPCC performs well in all modes, including
Orientation-locked, Non orientation-locked and FPV (Reset).
Working Modes
Orientation-locked Non orientation-locked FPV (Reset)
Gimbal Direction Gimbal pans with aircraft nose.
Gimbal pan and aircraft
nose move separately.
Gimbal pan and
aircraft nose are
synchronized.
Gimbal and Aircraft
Nose Relative Angle Gimbal keeps the same relative
angle with aircraft nose.
Relative angle between
gimbal direction
and aircraft nose is
controllable. The relative angle
between gimbal
direction and aircraft
nose is 0°.
TX Control Controllable Controllable Uncontrollable
Attitude Stability* YES YES YES
Vibration Reduction YES YES YES
Stick Movement
Definition
ROLL is locked level in 0~2/3
stick command and rotates in
2/3 ~endpoint; stick command
moves the rotation angle which
is limited to 40°in PAN; stick
command moves the TILT
rotation velocity of the gimbal. Stick command for
gimbal rotation velocity
is relative to total stick
movement. Stick’s
center position is 0°/s.
Its endpoint moves to
the maximum velocity.
———
Command Linearity YES YES ———
Note*: Attitude stability means that gimbal’s ROLL/TILT will not follow the aircraft’s ROLL/PITCH
movement.
Product Proile