1 assembly and configuration, Ardware, Nstallation and – DJI A2 User Manual

Page 6: Onnection, 1 mixer type supported, 1 hardware installation and connection

1 Assembly and Configuration

For hardware installation, software configuration and compass calibration please adhere to the following

sections.

1.1 Hardware Installation and Connection

(1)

Please adhere to “1.1.1 Mixer Type Supported” to choose a mixer type and assemble your aircraft.

(2)

Please adhere to both “1.1.2 Hardware Connection Diagram” and “1.1.3 Important for Assembly and

Connection” to install and connect all units on your aircraft.

1.1.1 Mixer Type Supported

Following Mixer Types are supported.

Quad-rotor X

Hexa-rotor I

Hexa-rotor V

Hexa-rotor Y

Quad-rotor I

Hexa-rotor IY

Octo-rotor I

Octo-rotor X

Octo-rotor V

The direction of the arrow in diagram indicates the rotation direction of the motor/propeller.

For coaxial propellers:

Blue

propeller is at

TOP

;

Red

propeller is at

Bottom

. Otherwise all propellers

are at top.